|
|
Telephone Numbers 251-609-0969 815-346-5300 (fax) |
New
Rotor Scooter Gyroplane!
|
Polyurethane-Coated Nylon
Fabric -- 1680 denier ballistic nylon is coated on one side with
a polyurethane coating. This fabric is light-weight, flexible in cold temperatures, and
has a high resistance to abrasion. No stretch or shrinkage. 59" width,
0.030" thick, 15 oz/sq. yd., in black only. |
Note: The following fans are just a few of the possible combinations that are available. We can build a custom fan for your application. Tell us how much horsepower you have available at a given RPM and we will find the best fan combination for your application. If your duct is already constructed, we can cut the fan diameter in 1/8" increments to match your existing duct with the proper blade-tip clearances for maximum efficiency. For more information click HERE and send us an e-mail. It is suggested that you use our Hovercraft Lift Calculator to determine the proper lift fan for your hovercraft application. Use the "CFS" output (multiply times 60 to convert to CFM) and the "cushion pressure" to select the proper fan.
Click HERE to send us a request for a fan suggestion/quote or to place your order on-line.
22"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive shaft.
Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm produces 16,200
cfm air flow at a static pressure of 4 inwg. requiring 24 hp @ 50
degrees blade pitch in AMCA
style A duct. Taper-lock
bushing is included to mount the fan to your keyed drive shaft. Wt. 4 lbs. |
|
|
22"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive shaft.
Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm produces 14,800
cfm air flow at a static pressure of 4 inwg. requiring 20 hp @ 45
degrees blade pitch in AMCA
style A duct. Taper-lock
bushing is included to mount the fan to your keyed drive shaft. Wt. 4 lbs. |
22"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive
shaft. Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm
produces 12,000 cfm air flow at a static pressure of 4 inwg. requiring 15
hp @ 40 degrees blade pitch in AMCA style A duct.
Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 4 lbs. |
|
22"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive shaft.
Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm produces 10,300
cfm air flow at a static pressure of 4 inwg. requiring 14 hp @ 35
degrees blade pitch in AMCA
style A duct. Taper-lock
bushing is included to mount the fan to your keyed drive shaft. Wt. 4 lbs. |
|
22"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive shaft.
Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm produces 7,440
cfm air flow at a static pressure of 4 inwg. requiring 8.5 hp @ 30
degrees blade pitch in AMCA
style A duct. Taper-lock
bushing is included to mount the fan to your keyed drive shaft. Wt. 4 lbs. |
|
22"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive shaft.
Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm produces 5,220
cfm air flow at a static pressure of 4 inwg. requiring 6 hp @ 25
degrees blade pitch in AMCA
style A duct. Taper-lock
bushing is included to mount the fan to your keyed drive shaft. Wt. 4 lbs. |
|
24"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive shaft.
Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm produces 12,200
cfm air flow at a static pressure of 4 inwg. requiring 14.5 hp @
35 degrees blade pitch in AMCA style A duct.
Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 4 lbs. |
|
24"
Hovercraft Lift Fan (type 3) with 8 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is not
adjustable. Fan fits directly on engine PTO shaft or other keyed drive shaft.
Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm produces 18,100
cfm air flow at a static pressure of 4 inwg. requiring 25.7 hp @
45 degrees blade pitch in AMCA style A duct.
Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 4 lbs. |
|
Replacement
blades for the 22" and 24" lift fans above. |
|
26"
Hovercraft Lift Fan (type 4) with 5 blades--fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Blade pitch is
adjustable. Fan fits directly on engine PTO shaft or other keyed drive
shaft. Fits up to 1 1/8" diameter shaft. Performance: 3600 rpm
produces 10,400 cfm air flow at a static pressure of 4 inwg. requiring 11.9
hp @ 25 degrees blade pitch in AMCA style A duct or 14,100
cfm @ 30 degrees blade pitch requiring 16.8 hp;
or 15,500 cfm @ 32.5 degrees blade pitch requiring 20
hp; or 17,100 cfm @ 35 degrees blade pitch
requiring 23 hp; or 18,200 cfm @ 37.5 degrees
blade pitch requiring 25.5 hp. Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 7 lbs. |
|
26"
Hovercraft Lift/Thrust Fan (type 3) with 10 blades-- fiberglass-reinforced
polyamide blades are resistant to water and UV rays. Specify engine shaft diameter,
keyway width, brand of engine, direction of rotation and blade pitch. Fixed blade
pitch available (degrees): 25, 30, 35, 40 and 45. Fan fits directly on
engine PTO shaft or other keyed drive shaft. Fits up to 1 1/8" diameter
shaft. Performance: 3600 rpm produces 13,400 cfm air flow at
a static pressure of 5 inwg. requiring 19 hp @ 30 degrees blade
pitch in AMCA style A duct.
Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 7 lbs. |
|
26"
Hovercraft Lift/Thrust Fan (type 3) with 10 blades-- fiberglass-reinforced
polyamide blades are resistant to water and UV rays. Specify engine shaft diameter,
keyway width, brand of engine, direction of rotation and blade pitch. Fixed blade
pitch available (degrees): 25, 30, 35, 40 and 45. Fan fits directly on
engine PTO shaft or other keyed drive shaft. Fits up to 1 1/8" diameter
shaft. Performance: 3600 rpm produces 17,400 cfm air flow at
a static pressure of 5 inwg. requiring 27 hp @ 35 degrees blade
pitch in AMCA style A duct.
Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 7 lbs. |
|
26"
Hovercraft Lift/Thrust Fan (type 3) with 10 blades-- fiberglass-reinforced
polyamide blades are resistant to water and UV rays. Specify engine shaft diameter,
keyway width, brand of engine, direction of rotation and blade pitch. Fixed blade
pitch available (degrees): 25, 30, 35, 40 and 45. Fan fits directly on
engine PTO shaftor other keyed drive shaft. Fits up to 1 1/8" diameter
shaft. Performance: 3600 rpm produces 21,200 cfm air flow at
a static pressure of 5 inwg. requiring 35 hp @ 40 degrees blade
pitch in AMCA style A duct.
Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 7 lbs. |
|
26"
Hovercraft Lift/Thrust Fan (type 3) with 10 blades-- fiberglass-reinforced
polyamide blades are resistant to water and UV rays. Specify engine shaft diameter,
keyway width, brand of engine, direction of rotation and blade pitch. Fixed blade
pitch available (degrees): 25, 30, 35, 40 and 45. Fan fits directly on
engine PTO shaftor other keyed drive shaft. Fits up to 1 1/8" diameter
shaft. Performance: 3600 rpm produces 25,200 cfm air flow at
a static pressure of 5 inwg. requiring 47 hp @ 45 degrees blade
pitch in AMCA style A duct.
Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 7 lbs. |
|
|
32"
Hovercraft Thrust Fan (type 4) with 9 blades-- fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Specify engine shaft diameter, keyway
width, brand of engine and direction of rotation. Fits up to 1 1/8" diameter
shaft. This fan is intended to be used within a properly sized and shaped duct for
efficient operation. Blade pitch is adjustable. Performance: 2500 rpm
(maximum) produces 36,900 cfm air flow at a static pressure of 1 inwg.
requiring 33 hp @ 40 degrees blade pitch in AMCA style A duct producing 104 lbs.
static thrust @ 1 % duct diameter clearance between duct wall and blade tip. Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 8 lbs. |
45"
Hovercraft Thrust Fan (type 5) with 8 blades-- fiberglass-reinforced polyamide
blades are resistant to water and UV rays. Provide details of bolt pattern of prop
flange, hole size, direction of rotation, horsepower rating of engine and make of
engine. This fan is intended to be used within a properly sized and shaped duct for
efficient operation. Blade pitch is adjustable. Performance: 2200 rpm
(maximum) produces 77,500 cfm air flow at a static pressure of 1 inwg.
requiring 92 hp @ 40 degrees blade pitch in AMCA style A duct producing 225 lbs.
static thrust @ 1 % duct diameter clearance between duct wall and blade tip. Taper-lock bushing is included to
mount the fan to your keyed drive shaft. Wt. 15 lbs. |
|
Note: The above fans/impellers are just a few of the possible combinations that are available. We can build a custom fan for your application. If your duct is already constructed, we can cut the fan diameter in 1/16" increments to match your existing duct with the proper blade-tip clearances for maximum efficiency. For more information on these fans, click HERE and send us an e-mail. |
|
|
|
Click here for information on Powerfin carbon fiber composite, adjustable pitch propellers for hovercraft and airboats.
Warp Drive Propellers
Click here for information on Warp Drive carbon fiber composite, adjustable-pitch propellers for hovercraft and airboat.
In-Flight Adjustable Propeller with Warp Drive Blades
Click here for information on this 2-blade prop with adjustable pitch while in use.
SELLER'S NOTICE AND DISCLAIMER
Prices, specifications, and availability are subject to change without notice. Products and materials advertised on this website are sold to the public with the understanding that the buyer assumes all risks and hazards involved in their use or application. Buyer/User acknowledges assumption of all risk and hazards by purchasing and/or using the products advertised and sold on this website. No express or implied warranties asserted nor fitness of merchantability claimed by Seller. ALL SALES ARE FINAL.
